Dispensers and Shakers
Helios Tinting team can help you with their experience and knowledge when choosing the right mixing equipment. The choice is personalized to the customer possibilities and needs.
There are many factors, which influence on dispenser selection like type and number of colorants, colorant consumption, type of customers, possibility to widen their range, logistics, price…Dispensers can be technically divided according to type of the pump: bellow pump, piston pump and gear pump technology and they can have sequential or simultaneous dosing.
We are developing and producing different sets of colorants. Each set is tested on different dispensers with various pump technology. Therefore, we can suggest to our customer, which pump technology is best for them.
Contact us for more information.
DECORATIVE COLORANTS: HG MIX ACRYLIC & HG MIX SOLVENT
For decorative coatings we suggest automatic dispensers with bellow or piston pump. Each has its own advantages and disadvantages.
PRODUCER | NAME | PUMP | Max nm. of canisters |
Canister size (L) | Intended mixing amount / day |
COROB | D200 | below | 16 | 2,5 | upon 300 L |
FAST&FLUID | X Smart | piston | 16 | 2,25 | upon 300 L |
X Protint | piston | 16 | 12×2,3; 4X4,6 | upon 300 L | |
HARBIL 180 | piston | 24 | 2,3 – 4,6 | upon 300 L | |
HARBIL 480 | piston | 32 | 2 – 3 – 6 – 10 | upon 500 L | |
SANTINT | A2 | piston | 16 | 2,3 | upon 300 L |
HERO | EURECA | piston | 32 | 3 – 5 | upon 500 L |
INDUSTRIAL COLORANT: UNIHEL MIX, BW MIX
For industrial colorants we recommend automatic dispensers with piston and gear technology.
PRODUCER | NAME | PUMP | Max nm. of canisters |
Canister size (L) |
Intended mixing amount / day |
COROB | EVO PWR | gear | 24 | 3 – 4 – 6 -15 9 – 20 |
400 – 800 L |
FAST&FLUID | HARBIL180 | piston | 24 | 2,3 – 4,6 | upon 300 L; smaller can |
HARBIL480 | piston | 32 | 3 – 3 – 6 – 10 | upon 500 L; | |
HARBIL680 | piston | 32 | 2 – 3 – 6 – 10 – 20 | 400 – 800 L; | |
HERO | NEWTON | piston | 24 | 5 – 10 – 20 | upon 800 L; greater can |
HERO | EURECA | piston | 2,5 – 5 | upon 500 L |
SHAKERS & GIROSCOPIC MIXERS
Difference between shakers and mixers is in their movement. This equipment is strongly connected to the dispensers. After dosing colorants in the base, you must homogenize the paint to get desired shade.
For easier decision what is best for our customer, you can check table below.
Shaker | Giroscopic mixer | |
Mixing range | 5 – 40 cm /40 kg | 8.6 – 48 cm / 40 kg |
Mixing more cans at once | ||
High viscosity product (plasters) | ||
Can < 10L (< 22 cm) | ||
Mixing in the storage – 20L cans |
We would like to recommend:
VIBRATIONAL SHAKERS
- SK 550
- I shake
GYROSCOPIC MIXERS
- GA 480
- I mix M2M